Yellowstone National Park

Clear Lake and Ribbon Lake Loop

Clear Lake and Ribbon Lake Loop is a varied Canyon-area loop through forest, meadows, thermal-influenced terrain, and lakes near the Grand Canyon rim. The mileage matters, but the real character of the route comes from forest trail, meadow, muddy sections, thermal-area boundaries, and rolling grades. Plan the entire outing—parking, trailhead preparation, movement time, breaks, changing conditions, and the return—rather than treating the destination as the only part of the hike.

The details below turn the route into a usable day plan. They explain the trailhead, major landmarks, permits, likely trouble points, pace, gear, and a shorter objective. Operating rules and conditions can change, so compare the plan with the managing agency's current alert before leaving for Wapiti Lake or South Rim trailhead area.

Clear Lake and Ribbon Lake Loop hiking trail image

The above image of Clear Lake and Ribbon Lake Loop was generated and may not accurately represent what it currently looks like.

DistanceAbout 5.3-mile loop
ElevationAbout 500 feet
Time3 to 5 hours
DifficultyModerate

Trail Conditions and Effort

The route is best understood as loop, with forest trail, meadow, muddy sections, thermal-area boundaries, and rolling grades. Those details affect speed, footwear, balance, water use, and whether every member of the group can complete the same movement on the return. A short trail with chains, deep sand, submerged rocks, ice, or steep stone steps can require more judgment than a longer smooth path.

Route walkthrough

1

Trailhead and First Section

Follow the signed route from Wapiti Lake or South Rim trailhead area through the lower forest or meadow. Pause at the end of this stage to compare actual time, water use, weather, and group condition with the plan. Confirm the next junction before moving, because a familiar-looking trail or a line of footprints can lead away from the intended route.

2

Main Route

3

Turnaround and Return

Trailhead access and arrival

Check current trail, road, wildlife, thermal-area, fire, and seasonal closure information. Trailheads are widely separated and cell service is limited.

The starting point is Wapiti Lake or South Rim trailhead area. Save the trailhead, route map, and permit proof offline. Arrive with enough time to solve a full lot or shuttle wait without rushing. Never invent roadside parking, cross a closed gate, or start late because the drive was longer than expected. A full access point is a reason to use the backup route selected at home.

Permit, services, and current rules

Day hiking does not require a permit; overnight backcountry camping does.

Plan for the Return Trip

Outward leg

Return leg

Return by the shortest signed route if storms, wildlife, mud, or uncertain navigation develops. The return can be uphill, hotter, darker, more crowded, harder on tired knees, or slower through water and loose ground. Keep food, water, attention, and daylight in reserve. Make the turnaround decision before anyone is depleted enough to argue for continuing.

Season, weather, and daily timing

Hazards to manage deliberately

The main concerns are bears, bison and other wildlife, thermal ground, sudden storms, cold water, mosquitoes, wildfire smoke, and limited communication. Name the hazards before starting so every person understands what would trigger a turnaround.

  • Footing: Slow down on wet rock, loose stone, roots, sand, snow, ice, or submerged surfaces. Use poles or traction only when practiced and appropriate.
  • Weather: Leave ridges, open summits, river corridors, and slot canyons before storms arrive. Thunder, rapidly rising water, or sudden wind is an action signal.
  • Heat and cold: Protect skin, carry layers, and watch for headache, nausea, confusion, shivering, or declining coordination. Do not wait for collapse.
  • Navigation: Confirm every important junction on the return. Crowds, footprints, and a phone dot are not substitutes for an offline map.
  • Wildlife: Give animals space, secure food, control pets where allowed, and follow local bear, bison, goat, snake, or nesting-season guidance.
  • Group management: Stay together, place a capable adult at the rear, and never leave a struggling person alone so others can reach the destination.

What to carry

  • Official route map, offline navigation, charged phone, cable, and backup battery.
  • Enough water for the full route, current conditions, and an unexpected delay.
  • Food for the planned time plus a reserve portion kept for the return.
  • Weather layers, rain or wind shell, hat, sunglasses, sunscreen, and dry insulation where needed.
  • Headlamp, first aid, blister care, personal medication, whistle, and emergency shelter.
  • Footwear and route-specific equipment for forest trail, meadow, muddy sections, thermal-area boundaries, and rolling grades.

Who should choose another hike

Leave enough margin to handle the part of the day that was not in the itinerary.

Frequently asked planning questions

How hard is Clear Lake and Ribbon Lake Loop?

The common rating is Moderate, but practical difficulty depends on forest trail, meadow, muddy sections, thermal-area boundaries, and rolling grades, weather, altitude, water, crowding, and the group's pace. Use the numbers and terrain together.

How early should I start?
Is there a shorter version?

Return by the shortest signed route if storms, wildlife, mud, or uncertain navigation develops.

Can I rely on water or trailhead services?
What should I verify that morning?